There are pros and cons to using hydro jetting for sewer line repair and replacement services. Here we discuss the advantages and disadvantages of this affordable trenchless technique.
Advantages of Hydro Jetting Over Other Sewer Line Repair Methods
- High Success Rate – Like any other repair method, hydro jetting has a success rate. In practice, however, most hydro jetting contractors report success rates of 95% or higher. The success rate of hydro jetting is because the process uses pressurized water, not air. So, if there is no blockage, the water will quickly break up any debris in the pipe, allowing the line to clear. In addition, hydro jetting can clean out the pipe if the damage is beyond repair. Then the line will stay in place.
- Less Expensive – Hydro jetting is significantly less expensive than trenching or excavating a new line. In some cases, hydro jetting costs are comparable to replacing the sewer line. Moreover, we have seen clients who have chosen hydro jetting over SLLRR for its cost-effectiveness.
- Quicker – The time it takes to dig a new sewer line depends on the project`s complexity and the condition of the existing right-of-way. Based on our experience, it typically takes six to 12 months to grade, lay, and connect a new sewer line. So, while the project begins once the line replacement is complete, the process is complete by the time the repairs are complete. Another advantage of hydro jetting is that it is quick. As a result, plumbers complete the job faster, saving money and keeping your property operational. Learn more https://morningsideplumbing.com/.
Disadvantages of Using Hydro Jetting For Sewer Line Damage
- Some Damage Is Not Repairable – Damage to the pipe itself is removed using hydro jetting and is not repaired. For example, a pipe that suffers large cracks needs replacement services. Hydro jetting will not fix this type of damage. Also, if the damaged section of the pipe is too large, using hydro jetting will not work. So, extreme pipe damage will mean you need a replacement.
- No Reuse Of The Pipe – A city sewer line is plastic, steel, or cast iron. Most hydro jetting contractors will clean the pipe using a non-abrasive cleaning method that leaves it untreated. That means the pipe is not treated for corrosion and will require regular inspection, cleaning, and maintenance.
- Expensive To Inspect – A city sewer line is inspected routinely to ensure it is in good condition. Hydro jetting does not leave the line in good condition, so regular inspections are necessary. That can be costly.
- Surface Impacts – Hydro jetting uses pressurized water, which in unskilled hands can damage surfaces or sidewalks. Read more information morningsideplumbing.com/.
Will Sewer Line Repairs or Sewer Line Replacements Solve The Problem?
That depends on the extent of the damage to the sewer line. Replacing the line is rarely cheaper than repairing it, but it might be more cost-effective eventually. The corrosion rate in a new pipe is higher than in an existing pipe, so that it will require regular inspection and cleaning. Moreover, once a sewer line replacement is complete, it cannot be used again and must be replaced. If the damaged section of the sewer line is small enough to be repaired, hydro jetting can clean out the line, and then the pipe can be reused. Another option is digging a deeper trench and using epoxy liners to line the trench while replacing the pipe. In some cases, hydro jetting is the best option and can save you time and money. Check out another resource here Morningside Plumbing.